stda16 c series 15w desktop power supply for i.t. equipment C wide input voltage 90 to 264 vac, 47 to 63hz C output voltage available from 3 vdc to 48 vdc C iec - 320 - c6 input inlet C optional output connector plug C splash proof C class i insulation C cec level v, energy star 2.0, and rohs compliance 2 year warranty approvals: single output part number output voltage max. output current total regulation maximum output power * stda16 c - s01 3 ~ 5 vdc 2.50 a max 7% 12w stda16 c - s02 5 ~ 6 vdc 2.50 ~ 2.00 a 5% 12w stda16 c - s03 6 ~ 8 vdc 2.00 ~ 1.50 a 5% 12w stda16 c - s04 8 ~ 11 vdc 1.87 ~ 1.36 a 5% 15w stda16 c - s05 11 ~ 13 vdc 1.36 ~ 1.15 a 5% 15w stda1 6 c - s06 13 ~ 16 vdc 1.15 ~ 0.94 a 5% 15w stda16 c - s07 16 ~ 21 vdc 0.94 ~ 0.72 a 5% 15w stda16 c - s08 21 ~ 27 vdc 0.72 ~ 0.55 a 5% 15w stda16 c - s09 27 ~ 33 vdc 0.55 ~ 0.45 a 5% 15w stda16 c - s10 33 ~ 40 vdc 0.45 ~ 0.37 a 3% 15w stda16 c - s11 40 ~ 48 vdc 0.37 ~ 0.31 a 3% 15w * note: stda16c - s01 is not approved by tuv - pse and cec level v electrical characteristics parameter test conditions min. typ. max. unit input voltage operating voltage 90 264 vac input frequency 47 63 hz output power range vin=90 to 264vac 0 15 w input current (low line) io=full load, vin=115vac 0.4 a input current (high line) io=full load, vin=230vac 0.26 a low line inrush current io=full load, 25c, cool start, vin=115vac 12 15 a high line inrush current io=full load, 25c, cool start, vin=230vac 26 30 a efficiency io=full load, vin=230vac 72 85 % no - load power consumption no load, vin=240vac 0 0.4 0.5 w line regulation io=full load 0.5 1 % load regulation vin=230vac 3 10 % over voltage protection nil % over current protection nil but, output protected to short circuit conditions % transient response io=full load to half load, vin=100vac 4 ms hold - up time io=full load, vin=110vac 5 ms start up time io=full load, vin=100vac 0.3 1 2 s * ripple & noise (peak to peak) full load, vin=90vac 0.5 1 % safety ground leakage current io=full load, vin=240vac 0.5 0.75 ma temperature coefficient all output - 0.04 0.04 %/c *note: the ripple & noise which is under 3.3vcd at 2% max
conditions parameter test conditions min. typ. max. unit operating temperature 0 40 70 c storage temperature - 40 85 c relative humidity 5 95 % operation temperature at 25c, calculated per mil - hdbk - 217f 100 khrs derate linearly from 100% load at 4 0c to 50% load at 70c approvals and compliance parameter test conditions min. unit dielectric withstanding voltage for primary to secondary primary to secondary 4242 vdc dielectric withstanding voltage for primary to ground primary to ground 2121 vdc isolation resistance test voltage = 5 00vdc 50 m emi requirements for cispr - 22 vin=220vac b class emi requirements for fcc part - 1 5 vin=110vac b class mechanical note: 1. dimensions are shown in mm & inch 2. weight: 165gs approx. 3. (exclude the input cord) 4. optional output connector.
|
